RC Helicopter>Tandem-5>TANDEM-5
.gif) Feature: A stable platform and it's easier assembly and maintenance less. A good choice and durable enough to be a training model. Tandem helicopter brings you fun of aerial photography and transportation as well. 1. Differential Collective Pitch (DCP) drive system design. 2. Two rotor disk increasing lift and smooth control. a. Thrust axis (thrust up and down). b. Pitch axis (forward and aft cyclic). c. Roll axis (lateral cyclic). d. Yaw (directional control). 3. Single motor drive two main shafts.; 4. Precision CNC metal rotor head perform smooth. 5. One-piece forming frames simplify installation and maintenance. 6. NYGF main blade is toughness, safety & more lift, good to be training blade. Specification:
Package Content:       1. Tandem-5 Standard Kits 1/set 2. Tandem controller x 1 set 3. Main Blade x 3 pairs 4. Brushless Motor(1360KV) x 1 5. CH-47D Scale fuselage 1:16 x 1 set 6. Velcro tape x 2 with servos screw 7. Instruction Manual Electronic Equipment Required: Transmitter(7-channel or more, helicopter system) Receiver(7-channel or more) Mini Servo x 6 pcs 6S Li-Po 5000mAh x 1 80~120A Brushless ESC x 1 Flybarless system x 1 set (recommend VStabi or Sk540) UBEC 10A x 1 3-pin Servo Extension Cable Wire Advice: Based on Safety demand, if this is your first experience to build a model helicopter, please work with experienced pilot to help your assembly and data setting job. A safe flight is your liability. Please read through this instruction manual carefully and observe the related instruction without fail. .jpg)  Safety / Quality / Approvals all in house TANDEM-5 E-POWER |
||||||||||||||||||||
 |
 |